Filter
Top Products
Base gasket
8
Sealant material
Sealant material (4)
2. Connect a coaxial cable to the Video output terminal, and connect the Camera power input cable and
power wire from the power-supply unit.
3. Fix the camera unit to the ceiling or wall using the four mounting screws.
Attach the supplied base gasket to the camera unit, then install the camera unit to the ceiling or wall. Since
no mounting screws are supplied with the camera, prepare them separately depending on the situation.
(Use screws that are over 4 mm
(
0.16 inch
)
in nominal diameter and longer than 25 mm
(
1 inch
)
.)
Note
The cable trench and four camera mounting holes must be protected with silicone sealant material to prevent
rainwater from leaking into the enclosure. Do not waterproof other holes.
[ Cable trench ]
[ Camera mounting holes ]