Toshiba IK-DF02A Security Camera User Manual


 
- 10 -
5-1-2. Installation to a Wall or Ceiling
To mount the camera directly on the
wall or ceiling.
1. Prepare the mounting space.
2. Place the camera on the wall or
ceiling and mark four screw
positions with a pen.
3. Attach the camera with the four
screws to the wall or ceiling.
4. Fasten all the screws.
(i) Rerouting the Wires for Flush Mounting the Camera
A: Routing the Wires to the Right Side
1. Remove the wires from the wire
hole and position them to the right
of the base.
2. Firmly secure the wires with the
wire tie. Do not overtighten the wire
tie.
Wires
Base
Wire Tie
Wire Hole
Note: Verify that the word "TOSHIBA" is on the visible side. When mounting on a wall, orient the
camera to face the unlock-button.
Upside
1.81(46)
1.65(42)
Dimensions: inch (mm)
3.29(83.5)
0.71(18)
Wire Access Hole
0.21(5.3)
Screw x4
Upside