Filter
Top Products
- 6 -
4. CONNECTIONS
•Power plugs of connected equipment must be disconnected before camera
installation.
•A 75-ohm coaxial cable with connector (3C-2V or 5C-2V) is required for standard
connection.
•For details of wiring and operation of equipment to be connected, refer to their
operation manuals.
•A power supply with cable, connectors and coaxial cable are not supplied with the
camera.
Notes on connecting
4-1. Basic connection single system configuration
The recommended power supplies for this camera are 6 watt minimum for each 24V
AC UL Listed Class 2 power supply or 12V DC power supply.
Do not overload power supply
CAUTION: Never input 24V AC and 12V DC at the same time.
(*) Recommended power cord is a minimum wire size of 18 AWG.
BNC Connector
Display Monitor
Connector
2Black
1Red
24V AC UL Listed Class 2 power supply
or
12V DC power supply.
Connector
1Red wire
2Black wire
24V AC
24V AC (L)
24V AC (N)
12V DC
Positive
Negative