Filter
Top Products
33
Power supply
12V DC
㫧
10%
Power consumption Approx. 10.3 W (including a camera head)
Pick-up system RGB, 3CCD, Micro prism system
Image sensor
1/3 inch, IT
䋭
CCD
Output pixels
Horizontal : 1920, Vertical : 1080
Scanning system
2
䋺
1interlace
Scan frequency
[59.94 Hz setting] Horizontal : 33.716 kHz, Vertical : 59.94 Hz
[50 Hz setting] Horizontal : 28.125 kHz, Vertical : 50 Hz
[59.94 Hz setting] Horizontal : 33.716 kHz
㫧35 ppm, Vertical : 59.94 Hz 㫧35 ppm
[50 Hz setting] Horizontal : 28.125 kHz
㫧35 ppm, Vertical : 50 Hz 㫧35 ppm
[59.94 Hz setting] Horizontal : 33.716 kHz
㫧35 ppm, Vertical : 59.94 Hz 㫧35 ppm
[50 Hz setting] Horizontal : 28.125 kHz
㫧35 ppm, Vertical : 50 Hz 㫧35 ppm
Sync system Internal/External (Automatic switching)
Horizontal resolution
800TV lines standard
Vertical resolution
800TV lines standard
Sensitivity
F6.8䋨59.94 Hz setting, 2000 lx, 3000 K䋩,F7.4䋨50 Hz setting, 2000 lx, 3000 K䋩
Minimum illumination
13 lx䋨59.94 Hz setting, F2.2, sensitivity䋫18 dB䋩,
11 lx䋨50 Hz setting, F2.2, sensitivity䋫18 dB䋩
SN ratio 56 dB standard (gain 0 dB, DNR OFF)
Ambient temperature
(32㫦
㫦
F)to 400 F to 104
㷄㷄
Ambient humidity Less than 90%
Weight Approx. 725 g (1.60 lbs)
External dimension
(4.33”(W)
㬍
1.57”(H)
㬍
7.32”(D)) (excluding protrusions)
110(W)
㬍
40(H)
㬍
186(D) mm
Scene file(user memories)
5 files (A, B, C, D, E)
White balance
ATW
䋨
Automatic tracing balance
䋩
,
AWB
䋨
Automatic white balance
䋩
MANUAL
䋨
Manual
䋩
Gain
AUTO
䋨
Automatic gain control
䋩
, MANUAL
䋨
Manual
䋩
,OFF
䋨
0 dB
䋩
Output signal
or RGB : 0.7 V (p-p) standard 75Y/P
B
/P
R
㱅
unbalanced, BNC connector
DVI-D (digital RGB) : DVI-D terminal
Sync signal output
SYNC : 75
㱅
unbalanced BNC connector0.6 V 0.1 V
Interface Serial data interface
䋨
RS-232C
䋩
Optional parts
IK-HD1H (3CCD HD Camera Head)
EXC䋭HD03 (Approx. 3 m (118”) Camera cable)
EXC䋭HD06 (Approx. 6 m (236”) Camera cable)
EXC䋭HD10 (Approx. 10 m (394”) Camera cable)
EXC䋭HD30 (Approx. 30 m (1181”) Camera cable)
AC-Y415A (12V DC Power Supply)
Design and specifications are subject to change without notice.
* These conditions are only satisfied when the camera control unit is connected to camera head model # IK-HD1H.
External sync input
HD SYNC 0.6 V (p-p) 75
㱅
unbalanced BNC connector
9. SPECIFICATIONS
㫧