Filter
Top Products
9
6. Setting
MODE SELECT switch
6.1 Gain switch
Use this switch when the image is dark even if the lens iris is fully opened. When the gain
ON is set, adjust the video signal level with the gain control volume on the rear panel.
No. 1: Gain ON/OFF
No. 2: Synchronizing signal selection
No. 3: Mode setting
No. 4: Mode setting
No. 5: Mode setting
No. 6: Electric shutter speed
No. 7: Electric shutter speed
No. 8: Electric shutter speed
No. 9: Partial scanning area
No. 10:Partial scanning area
ON
12345 67890
Mode
Gain OFF
Gain ON
No.1
OFF
ON
(–3 to 12dB variable with the control volume)
Mode
HD/VD
LEN/FEN
No.2
OFF
ON
Mode
Internal synchronization
1-pulse trigger
Pulse width trigger
Internal synchronization draft mode
Internal synchronization partial scanning*
1-pulse trigger partial scanning
Pulse width trigger partial scanning
Internal synchronization partial scanning*
No.3
OFF
OFF
OFF
OFF
ON
ON
ON
ON
No.4
OFF
OFF
ON
ON
OFF
OFF
ON
ON
No.5
OFF
ON
OFF
ON
OFF
ON
OFF
ON
6.2
Synchronizing mode selector switch
This selects the DIGITAL terminal synchronizing signals output.
6.3 Mode setting switch
This sets the operation mode.
* Same mode