Filter
Top Products
14
(1. 2) Changing each setting in SS (synchro. scan) mode
(a) Changing the shutter speed setting
1
Set the "→" to SS by pushing [MENU UP], [MENU DOWN] buttons.
2
Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
(b) Partial scanning setting
1
Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.
2
Select either OFF/30fps/40fps/E.30fps/E.40fps by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is a charac-
teristic of CCD, and is not a symptom of malfunction.
OFF : 2H/1592H ∼ 1590H/1592H↔OFF↔2FRM↔512FRM
30fps, E.30fps : 2H/1060H
∼
1058H/1060H↔OFF↔2FRM↔512FRM
40fps, E.40fps : 2H/774H↔772H/774H↔OFF↔2FRM↔512FRM
• Sutter mode MANU, SS, E.TRG
• Synchro. scanning setting
• Partial scanning switch
OFF/30fps/40fps/E.30fps/E.40fps
-- SHUTTER --
MODE SS
SS OFF
PART
OFF
<MODE = SS>
Move up down
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN