Filter
Top Products
171717
Installation
Wizard
1. Install the "Installation Wizard" under the Software Utility directory from the CD-
ROM.
2. The program will analyze your network environment. After your network is
analyzed, please click on the "Next" button to continue the program.
3. The program searches for other Network Cameras on the same network.
4. After searching, the main installer window will pop up. Double click on the MAC
address of the appropriate device to connect to the Network Camera.
NOTE
l
If "Installation Wizard" does not nd the camera during the search, try turning off the
wireless LAN of a PC.
l
Installation Wizard can search the location of the Network Camera even though
DHCP is not used on the network. In this scenario, assign the camera a static
IP address because the IP address of the Network Camera has been assigned
169.254.*.* by default.
Assigning IP Address
E324690
38KG
0002D1714270
00-02-D1-71-42-70 169.254.0.99 IK-WR12A