Filter
Top Products
2121
Completion
2
1
B
3
Be aware of the cable route!
1. Align the inner side of the black cover with the notches on both sides of the lens, x
the black cover.
Note:
The black cover cannot be attached if installed in the wrong orientation.
2. If you choose to feed the cable through the ceiling/wall, arrange the cable neatly
through the cable hole. If you choose to feed the cable from the side, remove plate B.
3. Attach the dome cover to the camera as shown below. The dome cover cannot be
attatched if installed in the wrong orientation. Align the side cover (or side cutout)
with where the cable comes out from the camera. Push the dome cover to join with
the camera.
4. Finally, make sure all parts of the camera are securely installed.