Filter
Top Products
31
Video Stream: This Network Camera supports multiple streams (stream #1 ~ #3) simultaneously. You
can select any one of them for live viewing. For more information about multiple streams, please refer to
page 88 for detailed information.
Manual Trigger: Click to manually enable or disable an event trigger. Please congure an event setting
before enabling this function. A total of 3 or 4 event settings can be congured. For more information
about event setting, please refer to page 95. If you want to hide this item on the homepage, please go
to the System > Homepage Layout > General settings > Customized button to deselect the “show
manual trigger button” checkbox.
Digital Output: Click to turn the digital output device on or off.
PTZ Control Panel:
Pano.: Click this button to start the automated circular rotation through a regional view (360° continuous
rotation). Note that this function does not apply in a Panoramic view because a Panoramic view already
shows the full coverage.
Stop: Click this button to stop the Auto Pano and Auto Rotate functions.
Pan /Tilt /Zoom /Panoramic/Rotate speed: Adjust the speed of these controls when exerted:
Note: All regional display positions and PTZ setup are not store on Home screen, and reset after change
of “Display mode” and “Mount type”.
Conguration Area
Client Settings: Click this button to access the client setting page. For more information, please refer to
Client Settings on page 35.
Conguration: Click this button to access more of the conguration options provided with the Network
Left
Down
Zoom Out
Start to Auto Pano
Stop Auto Pano
Return to Home Position
Right
Up
Zoom In
Pan speed Tilt speed Zoom speed Panoramic
speed
-5 -5 -5 - Slower
Faster
-4 -4 -4 -
-3 -3 -3 -
-2 -2 -2 -
-1 -1 -1 -
0 0 0 -
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
5 5 5 5