TP-Link TL-SC3230N Security Camera User Manual


 
3
1.3 Minimum System Requirements
FPS
(QVGA)
~120 120~360 360~540 540~960 960~
CPU Intel P4
2.4GHz
Intel P4
3.2GHz
Intel Pentium D
950
3.4GHZ
Intel core 2 Duo
E8600
3.3GHZ
Intel core i7
2600K
3.8GHZ or above
RAM 512MB 512MB 1GB 2GB 8GB or above
Display 1024x768 resolution or above
Support DirectX 9.0c or above
Intel 945G or Intel 965G or above
OS
Windows XPWin 7 (32bits or 64bits)
Hard disk 60GB
Ethernet 100Mbps 1Gbps
Chipset Intel 945 or Intel 965 or above
Since the Windows system occupies certain resources, it is suggested to get higher grade
computer hardware to reserve more processing power when more cameras are added into the
surveillance network.
QVGA = 320 x 240 pixel
CIF QVGA , D1 VGA at mapping table below.≒≒
Image resolution mapping table
Resolution Compared with QVGA
QQVGA QQVGA = QVGA / 4
VGA VGA = QVGA x 4
SXGA SXGA = QVGA x 16
FULL HD FHD = QVGA X 24
To reach the Max. camera count, it is required to adjust the video resolution/FPS settings on each
channel to make the Surveillance Manager PC able to run/decode/record the video stream.
z Microsoft Internet Explorer 6.0 or later
z Microsoft Media Player 11.0 or later (to playback recorded file)
z VGA Monitor resolution 1280 x 1024 or higher
z Pentium-4 3.6 GHz or higher
z Memory Size: 1GB or more