TRENDnet TV-IP551W/TV-IP551WI Security Camera User Manual


 
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP551W / TV-IP551WI
21
Restart
If you should need to restart the IP camera, you can do this from this screen.
Clicking Yes will initiate a reboot sequence on the camera. When you restart the
camera you will lose your connection to it. Wait 1 minute before attempting to
reconnect to the camera so that it has time to go through its boot up sequence.
Restarting the camera will retain the configuration settings you have entered.
Factory Reset
If you should need to restore the camera to the factory settings, you can do it from this
screen. Clicking Yes will initiate a reboot sequence on the camera. When the camera
restarts, you will lose your connection to it. The username and password will also both
be set back to the default admin. Wait 1 minute before attempting to reconnect to the
camera so that it has time to go through its boot up sequence.
Note: Factory reset will erase the current configuration settings on the camera. You
should back up the settings first if you wish to keep them. See the Backup and Restore
section for more information.