Filter
Top Products
23
22
When you press gently the Shutter button
halfway, the focus is set (Auto Focus).
Press the above-mentioned shutter a little
harder for about 1 second.
Short-distance Capture (Macro)
Is used for a short-distance capture within the range of 0.2m~0.5m.
When pressing twice the button under the LCD monitor, icon
appears and thus short-distance capture is undertaken.
If pressing and among the Zoom buttons, TELE mode and WIDE
mode of zoom is set.
T
W
HQ
L
ML
EV
0/3
T
W
T
W
The subject is closer in the ZOOM IN (TELE) status.
The subject is further in the ZOOM OUT (WIDE) status.
I If you set digital zoom in camera setting mode, the subject
will be twice the size with added digital movie effect as well as
3 times larger optical zoom in case of pressing the
Button (Magnified up to 6 times larger).
Button
Button
Digital Zoom
Shutter button
T
Upon a short-distance capture, you cannot use the flash.
Since the images on the View Finder and LCD are different,
you need to take pictures through the LCD monitor.
Upon a short-distance capture, a flash capture may damage
one's eyesight, and the quality of an image may not be good.
When using short-distance capture mode, always take
pictures in the flash prohibition state.
Flash Setting
Flash is required when taking a picture at night, indoors or in the shade.
The distance in which the flash is used is restricted: Wide - 0.5m ~3.0m and
Tele-0.5m~2.0m.
Turn on the power of the camera.
Select adequate flash mode according to capture condition by pressing the
button. The desired flash mode below should be indicated in the upper
LCD monitor.
Flash mode is set as below, whenever the button is pressed:
Flash prohibition ->Night flash ->Auto flash ->Red eye prevention ->
Forced flash -> Flash prohibition