Ulead KDC330 Camcorder User Manual


 
43
42
By pressing the Power Onbutton
for about 1 second, switch the camera on.
Set the Mode Selection Dial to Still
Continuous Capture Mode
Decide the capturing composition with
either the View Finder Window or LCD Monitor
Set the subject within the square of the LCD monitor when taking pictures.
By using zoom or , you can zoom in or zoom out the screen to
capture.
When you gently press the Shutter button halfway, the focus is
automatically set (Auto focus).
Press the above-mentioned shutter a little harder for about
1 second.
After capturing 4 frames consecutively, conduct storing
Basic Capture
Still Continuous Capture Mode
HQ
L
ML
EV
0/3
T
W
Power
Button
In the Still Continuous
Capture Mode, the use of
the Flash is prohibited.
T
W
Refers to capturing images continuously, when you press the Shutter button.
Continuous capturing is possible until the buffer reaches the maximum
Press the Menu button for camera setup.
Rec/More/Set menus are in the Menu window. Select
a setting to select on each menu. When you select a
menu, use the Navigator (Direction key).
Press to save the menu
When the value to set is saved, return to the reset (initial) screen by pressing
the Menu button.
Menu setup
O K
Rec setting
REC
SIZE
QUALITY
DIGITAL TELE
L
M
S
RECORD MODE
[Picture size setting]
O K
REC
SIZE
QUALITY
DIGITAL TELE
HQ
SQ
RECORD MODE
[Picture quality setting]
O K
REC
SIZE
QUALITY
DIGITAL TELE 1X
2X
RECORD MODE
[Digital zoom setting]
Size: Determines the size of a picture
- L: 2040x1530
- M: 1280x960
- S: 640x480
Quality: Determines the quality of pictures
- HQ: Compressed to about 1/5.
- SQ: Compressed to about 1/10
Digital tele: Selects digital zoom.
- 1x: Setting the same size
- 2x: Setting 2 times larger