Filter
Top Products
Item What it is
10 LED night light bars.
11 IR LEDs (Covered): Infrared LEDs provide
viewing in no/low light conditions.
12 Light sensor: Measures light intensity on
the camera side.
13 Lens: Camera lens.
14 Microphone: Receives sounds for the area
near the camera, and transmits sound from
the camera to the monitor.
15 Speaker: Produces the sound transmitted
from the monitor.
16
POWER
: Turns the camera ON or OFF.
17
NIGHT lIGHT
: Press to turn the night light ON
or OFF.
18 Charging LED:
Red = Charging
Green = Fully charged
Off = Camera and power adapter are
disconnected or power adapter is
disconnected from power source.
19 Power LED:
Green = Camera is turned on.
Green (Blinking) = Battery is low.
20 DC 5V Power: Connects the DC 5V power
adapter to the camera.
Refer to the UBR223 or UBR243 Wireless Baby
Monitor Owner’s Manual for pairing and other
operation instructions.
The UBRC13 clip has two slots that fit over screws
to mount the unit on the wall.
1. Mark the position of the screw holes on the
wall.