Filter
Top Products
1. Insert the AC adapter power plug into the
camera’s DC adaptor input jack.
2. Plug the other end into a 120 volt AC (standard
indoor) power outlet or surge protector.
3. Press
and make sure the green power
LED
turns on. If it doesn’t, try reconnecting the
AC adapter, making sure the power outlet isn’t
controlled by a wall switch.
1. To control the lullabies from the monitor, decide
which camera you want to play lullabies and
make it the full screen live view camera.
2. Press
on the monitor or
camera. The system plays Lullaby #1 then
repeats it.
3. Press
to skip to Lullaby #2. The
system plays Lullaby #2 then repeats it.
4. Press
to skip to Lullaby #3. The
system plays Lullaby #3 then repeats it.
5. Press
to skip to Lullaby #4. The
system plays Lullaby #4 then repeats it.
6. Press
to skip to Lullaby #1. The
system plays Lullaby #1 then cycles through all
lullabies.
7. Press
and
on the monitor or camera
to adjust the volume. Press
all the way
down on the monitor to mute the lullaby playing
through the monitor.
# Refer to your UBR223 or UBR243 system
owner’s manual for further details.
Operating frequency
range
2.400 ~ 2.4835GHz
TX power 15dBm (typical)
Spread spectrum FHSS