ViewSonic VFM1530-11 Camera Lens User Manual


 
2
ViewSonic VFM1530-11
Important Safety Instructions
1. Do not use the equipment near water.
2. Wipe the machine with a soft and dry cloth.
3. Do not block any vent holes. Please install the product in accordance with the manufacturer’s
instructions.
4. Do not use the product on your legs for a long time because it gets hot and you may be burned.
5. Please avoid installing the product in a place where the temperature is above 35°C or lower than 5°C,
or in a place that is moist or wet.
6. Protect the power cord plug, outlet, and connections to other equipment from damage by trapping
and squeezing.
7. Please only use devices and accessories specied by the manufacturer.
8. The unit is hot pluggable. However it is recommended that the power be turned off before the
memory card is inserted or removed.
9. Do not remove the memory card during data access. The data may be lost and the product could be
damaged.
10. Disconnect the power cord if the product will not be used for an extended period.
11. Do not repair, disassemble, or modify the product. Only qualied ViewSonic personnel can check
and repair any damage to the machine.
12. The unauthorized playing of certain audio or image les may infringe the related copyright laws
under certain circumstances.
13. When you use the internal speakers, do not adjust the volume to a high level, or the sounds may
distort and become unpleasant.
14. When you view pictures for an extended period of time your eyes may become strained.
15. Do not touch the screen because it is difcult to remove nger marks.
16. Avoid exposing the digital photo frame to direct sunlight. Adjust the angle to reduce glare.
17. Careful attention should always be paid when moving the digital photo frame.
18. Make sure the place where the digital photo frame is placed is clean and dry.
19. If there is smoke, a strange smell or an abnormal noise, immediately turn off the digital photo frame
and contact your dealer or ViewSonic.
20. Do not rub or apply pressure to the LCD panel. This may cause irreparable damage to the screen.