Filter
Top Products
Preparing Your Camera For Use
-6-
Battery Installation
Your camera requires two AAA alkaline batteries, which must be inserted as follows:
1. Slide open the battery compartment at the bottom of the camera.
2. Insert the batteries in accordance with the polarity (+/-) shown on the inside of the cover.
3. Close the battery compartment.
The LCD display screen will ash if your batteries are running low in which case you will need
to replace the camera’s batteries before taking photos. When the batteries get very low on power,
the LCD display screen will display “Lo” and then automatically switch o.
Note: If you do not intend to use your camera for an extended period, remove the batteries to
avoid leakage and corrosion.
Warning:
• Please download any photos you have on the camera before opening the battery
compartment.
• Opening the battery compartment and/or removing the battery will erase the photos
currently stored in the camera.
• Download your photos as often as possible. Photos may be lost when the batteries
run low.