Filter
Top Products
-9-
Mounting Your Flash to Your Camera and Removing It
• For Type CAN, NIK, OLY, PANA and PEN flashes:
Release the Lock button. Insert the mounting foot of
the flash unit into the camera's accessory shoe clip.
Press the Lock button to fasten the flash unit to your
camera.
• For Type SON flash: Insert the mounting foot of the
flash unit into the camera's accessory shoe. Then the
flash unit is locked in place.
Mounting Your Flash to Your Camera
Removing the Flash from Your Camera
For Type CAN, NIK, OLY, PANA & PEN flashes: Press both sides of the Shoe Release
button towards the direction indicated by the arrow symbols. Then remove the flashby
pulling it backwards, away from the camera.
For Type SON flash: Push the Shoe Release button and pull the flash off backwards,
away from the camera.