Filter
Top Products
EN-15
User’s Manual >>
GETTING STARTED
Attaching the ViviCam 3105s Strap
Attach the ViviCam 3105s strap as shown in the illustration.
Loading the Batteries (Optional Accessory)
You can use either 2 AAA size batteries (Alkaline or Ni-MH) to power the ViviCam 3105s.
1. Make sure the ViviCam 3105s is turned
off.
2. Open the battery cover.
3. Load the batteries, noting correct polarity
(+ and -).
4. Close the battery cover firmly.
1
2
The SDRAM needs power supply all the time to maintain its function. If the
batteries are removed from the ViviCam 3105s, images stored in SDRAM
may lose or the captured images may deteriorate or the ViviCam 3105s may
not be operated normally or may shut down automatically. When one of the
above issues occurred, remove the batteries from the ViviCam 3105s for
approximate five to ten minutes, and then load the batteries again to turn on
the power. In this case, the stored images have been deleted.