Filter
Top Products
4. GETTING STARTED
• Before using your camera insert two AA batteries into
the battery compartment. Note the proper
orientation.
• During operation, if the battery power gets very low,
a warning message “LOW” message will appear on
the Status LCD. Please replace the new batteries
immediately to ensure normal operation.
• Note: If you are NOT using a memory card your
images will be stored in the internal memory. If you
remove the batteries from your camera for more than
20 seconds your images will be lost because the
internal memory will be erased in the absence of
battery power. (Images stored on a memory card will
not be erased if power is removed.)
4.1
Power On/Power Off
• Power On: Press and hold the power button for three
seconds. As soon as you hear the audio tones
(greeting) you may release the power button.
• Power Off: Press and hold the power button for two to
three seconds until two beeps are heard and power is
off.
• Auto Power Off: To save power, the camera will
automatically turn off after 60 seconds if no buttons
are pressed.