Filter
Top Products
VIVOTEK
140 - User's Manual
8.5 Upgrade Firmware
Note: This request requires Administrator privileges.
Method: POST
Syntax:
http://<servername>/cgi-bin/admin/upgrade.cgi
Post data:
fimage=<file name>[&return=<return page>]\r\n
\r\n
<multipart encoded form data>
Server will accept the file named <file name> to upgrade the firmware and return with <return page> if
indicated.
8.6 IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER VALUE DESCRIPTION
addallow Add allowed IP address range to the server. Start and end parameters must be
specified. If the index parameter is specified, it will try to add starting from the
index position.
adddeny Add denied IP address range to the server. Start and end parameters must be
specified. If the index parameter is specified, it will try to add starting from the
index position.
deleteallow Remove allowed IP address range from server. If start and end parameters are
specified, it will try to remove the matched IP address. If index is specified, it
will try to remove the address from given index position. [start, end]
parameters have higher priority then the [index] parameter.
Method
deletedeny Remove denied IP address range from server. If start and end parameters are
specified, it will try to remove the matched IP address. If index is specified, it
will try to remove the address from given index position. [start, end]
parameters have higher priority then the [index] parameter.