Filter
Top Products
VIVOTEK
96 - User's Manual
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the dened threshold.
If you want to congure a motion detection setting for a different scenario, please click Prole to open
the Motion Detection Prole Settings page as shown below. A total of three motion detection windows
can also be congured on this page.
Please follow the steps beolw to set up a prole:
1. Create a new motion detection window.
2. Check Enable this prole.
3. Select the applicable schedule for the current setting. Please manually enter a range of time during
which the conguration will take effect.
4. Click Save to enable the settings and click Close to exit the page.
This motion detection window will also be displayed on the Event Settings page. You can go to Event
> Event settings > Trigger to choose Motion Detection as a trigger source. Please refer to page 100 for
detailed information.
Percentage = 30%
Video(TCP-AV)
2010/12/10 17:08:56