VIVOTEK
108 - User's Manual
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the preset threshold.
If you want to congure other motion detection settings for day/night/schedule mode (e.g., for a different
lighting condition), please click on Prole to open the Motion Detection Prole Settings page as shown
below. Another three motion detection windows can be congured on this page.
Please follow the steps beolw to set up a prole:
1. Create a new motion detection window.
2. Check Enablethisprole.
3. Select the applicable period of time for the Schedule mode. Please manually enter a range of time.
4. Click Save to enable the settings and click Close to exit the page.
This motion detection window will also be displayed on the Event Settings page. You can go to Event
>Eventsettings>Trigger to select it as a trigger source. Please refer to page 114 for detailed
information.
Percentage = 30%
Video(TCP-AV)
2010/12/10 17:08:56
2013/2/3 14:39:12
hallway
2014/2/3 14:39:12