Filter
Top Products
VIVOTEK
User's Manual - 13
A
A
Wall Mount
Ceiling Mount
1. Attach the alignment sticker to the ceilling/wall.
3. If you want to feed the cable through the ceiling/wall, drill a cable hole A as shown in the
above picture.
2. Drill three pilot holes into the ceilling/wall.
4. Hammer the supplied plastic anchors into the holes.
5. Secure the camera using the supplied screws.
4
o
O
g
B
b
G
br
BR
1
2
3
4
5
6
7
8
o: white/orange stripe
O: orange solid
g: white/green stripe
B: blue solid
b: white/blue stripe
G: green solid
br: white/brown stripe
BR: brown solid
4. You will need an RJ45 crimping tool to attach the Ethernet wires to a connector. When
done, connect the cable to the camera’s Ethernet RJ45 socket.