Filter
Top Products
VIVOTEK
80 - User's Manual
Preference
On this page, you can tune the White balance, Image adjustment and the WDR enhanced function.
White balance: Adjust the value for the best color temperature.
■ You may follow the steps below to adjust the white balance to the best color temperature.
1. Place a sheet of paper of white or cooler-color temperature paper, such as blue, in front of the lens,
then allow the Network Camera to automatically adjust the color temperature.
2. Select the Fix current value checkbox and confirm the setting while the white balance is being
measured.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5.
■ Saturation: Adjust the image saturation level, which ranges from -5 to +5.
■ Sharpness:
Adjust the image sharpness level, which ranges from -3 to +3.
You can also select
Customize and manually enter a value.
■ Gamma curve:
Adjust the image sharpness level, which ranges from 0.45
to 1.0
.
You may let rmware Optimize your display or select a value to change the preferred level of Gamma
correction towards higher contrast or towards the higher luminance for detailed expression for both dark
and lighted areas of an image.
■ Enable low light compensation: Select this option in low light mode, and the values of sharpness and
brightness will change automatically. This function also benets from an automated noise reduction
feature.
Sensor Setting 2:
For special situations
Sensor Setting 1:
For normal situations