Vivotek FE8181 Security Camera User Manual


 
VIVOTEK
220 - User's Manual
path according to the current path.
8.13 Preset Locations (capability.ptzenabled, not used in FE8174,
FE8181)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/preset.cgi?[channel=<value>]
[&addpos=<value>][&delpos=<value>][&return=<return page>]
PARAMETER VALUE DESCRIPTION
addpos <Text string less than
30 characters>
Add one preset location to the preset list.
channel <0~(n-1)> Channel of the video source.
delpos <Text string less than
30 characters>
Delete preset location from preset list.
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
8.14 ePTZ Preset Locations (capability.eptz > 0, not used in
FE8174, FE8181)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/ePreset.cgi?channel=<value>&stream=<value>
[&addpos=<value>][&delpos=<value>][&return=<return page>]
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of the video source.