Vivotek IP3112 Digital Camera User Manual


 
- 49 -
www.vivotek.com
B. Frequently asked questions
Q What if I forget my password?
A After the Administrator's password is assigned, every access to the Network Camera
needs authentication. If you are one of the managed users, you have to ask the
Administrator for the password. If you are the Administrator, there is no way to recover
the root password except for restoring factory default. Refer to Appendix A for the
procedures.
Q Why can I not watch video from the Network Camera after it is authenticated?
A There are many possible scenarios regarding this problem,
1. If you have just installed the Network Camera and are unable to watch the video,
check if the heartbeat LED is blinking or the lens cap is removed. If the heartbeat LED
is dim, perform the software installation again.
2. If the Network Camera is well installed and you are accessing the Network Camera
for the first time using Internet Explorer, adjust the security level of Internet Explorer
to allow installation of plug-ins.
3. If the problem still exists after adjusting, and the message over the image window
is showing "connecting", the network traffic may be too crowded.
Q What is the plug-in for?
A The plug-in provided by the Network Camera is used to display motion pictures and
audio in Internet Explorer. If your system does not allow installation of any plug-in
software, the security level of the web browser may need to be lowered. It is
recommended that you consult your network supervisors in your office regarding
adjustment of the security level. Software installation may be regulated in some
offices.
Q Why is the timestamp different from the system time of my PC or notebook?
A The timestamp is based on the system time of the Network Camera. It is maintained
by a real-time clock inside and can be automatically synchronized with the time server
if the Network Camera is connected to the Internet and the function is enabled.