Filter
Top Products
- 54 -
www.vivotek.com
Maintenance
Five actions can be selected.
“Format CF” Click it to format CF card. A pop-up window will show the result of
formatting. It is failed if the event or recording uses the CF card or no CF is existed.
“Umount CF” Click it to umount CF card. Suggest to stop all event and recording and
then umount CF before you removed CF card.
“Reboot” Click the reboot button to restart system
“Restore” Click it to restore all setting to factory default except setting in “Network
type” in network page.
“Default” Click on Factory default button on the configuration page to restore the
factory default settings. Any changes made so far will be lost and the system will be
reset to the initial factory settings. The system will restart and require the installer
program to set up the network again.
“Upgrade firmware” Select the firmware file and click upgrade button