Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 11
Set up the Network Camera through Wireless Connection (PZ7152 only)
1. Check the SSID currently set on your wireless access point (AP).
2. Go to PZ7152's Confi guration > Wireless LAN.
3. Type in the SSID consistent with the setting on your AP.
4. Select the Wireless mode as "Infrastructure".
5. Click Save.
6. Pull out the Ethernet cable.
7. Power off the camera.
8. Power on the camera.
NOTE
► SSID, abbreviated from Service Set Identifi er
, is the name assigned to the wireless network.
The PZ7152's factory SSID setting is set to "default".
► Select "Ad-Hoc" wireless mode if you want the PZ7152 to communicate without using an AP
or wireless router.
►
For detailed information about wireless connection, please refer to Wireless LAN on page 38.
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
ADSL/Cable/Hub
AP