Filter
Top Products
9
Operation
1
“LED LIGHTS”
HDD: HDD is reading or recording
HDD Full: HDD is full.
ALARM: Once the alarm is triggered
TIMER: When timer recording is turned on
PLAY: Under playing status
REC: Under recording status
2
“MENU”
Press “MENU” button to enter the main menu.
3
“ENTER” / “SET”
Press “ENTER” button to confirm the setting.
Press “SET” to change the position of the channel display.
Press “▲▼◄►“ to select the channel which you would like to change.
Press “＋” or “－” to select the channel which You would like to show.
4
“REC”
Press “REC” button to activate the manual recording.
5
“SEARCH”
Press “SEARCH” button to enter the search menu.
6
“SLOW”
Under the playback mode, press “SLOW“ button to show slow playback.
7
“ZOOM”
Press “ZOOM” button to enlarge the picture of selected channel (under the live
mode).
8
“ ” / “ － ”
Press “ “ button to show the 4 channel display mode.
Press “ － ” button to change the setting in the menu.
9
“SEQ” / “ ＋ ”
Press “SEQ” button to activate the call monitor function and press “SEQ” button
again to escape the call monitor mode.
Press “＋ ” button to change the setting in the menu.
10
“ “ or “Power”
Press this button to turn (On / Off) the DVR.
(Under the recording mode, please stop recording before turning off the DVR).
11
“CH1 ” “CH2 ” “CH3 ” “CH4 ” Press “1 ” “2 ” “3 ” “4 ” buttons to select the channel to display
12
“ ” or “PLAY”
UP / PAUSE
DOWN / STOP
LEFT / REWIND
RIGHT / FAST FORWARD
Press “ “ to playback the recorded data.
Press “▲▼◄►“ to move the cursor up / down / left / right.
Under the playback mode, press “ II “ button to pause playback.
Under the playback mode, press “ ■ “ button to stop playback.
Under the playback mode, press “►►“ button to fast forward.
Under the playback mode, press “◄◄“ button to fast rewind.
OPT
SLOW & ZOOM
Press these two buttons to select live or playback sounds of the audio channels.
OPT
& SEQ
Press these two buttons at the same time to enter / exit the PTZ control mode.
2 3 4 5 6 7 8 9
12 11 1 10