Filter
Top Products
31. Tripod Socket4www.butkus.org
32. Back Cover Release Ring
33. Back Cover
34. Pressure Plate
35. 35 mm Film Take-up Spool
36. 35 mm Picture Frame
37. 35 mm Film Cassette
HOW TO REMOVE CAMERA FROM
ITS CASE
As a preliminary step in film loading
, take
out the camera from its case.
1. Open the front cover and detach it by
unfastening the three snaps on the base.
2. Pull out the Slide Locks on both
sides.
3. Spread out the sides of the case and take
out the camera.
To return the camera into its case, follow
the foregoing procedure in reverse.4www.butkus.org