Filter
Top Products
4
3
STEP 1
Insert CD to install Digital Media software on
your computer, follow the on screen
instructions and please make sure that:
• Security software on your computer or laptop is turned OFF during
the installation e.g. Firewall and AntiVirus; please remember to switch
it back on following successful installation.
• All other applications are CLOSED DOWN e.g. Email, Web Browser,
Word Processor.
• You have a spare Ethernet port on your computer or laptop.
For different type of TV or Hi-Fi connectivity, please refer to your TV or Hi-Fi manual
i
b. Connect the audio cables left (red)
and right (white) into the colour
corresponding sockets at the back
of the DMA1100P.
c. Connect the SCART connector into an available SCART socket on the
rear of your TV.
STEP 2
Connecting your DMA1100P
HomePlug Digital Media Streamer
Connecting to your TV
Standard installation – for SCART Users
a. Unpack the SCART Cable and
connect the Composite Video
connector (yellow) into the yellow
Composite Video socket at the
back of the DMA1100P.
DMA1100P Connections
Turn off your TV before connecting your DMA1100P
1
2
It is not recommended that you connect both a SCART cable and an HDMI cable into the
same HDTV - please use one or the other.
i
High definition installation - using a HDMI cable*
Plug in one end of the HDMI cable into the
HDMI socket on the DMA1100P and the
other end into an available HDMI socket on
the HDTV.
*The HDMI cable is not included
Connect your computer or laptop
a. There are several ways to connect to your network:
The DMA1100P when powered on will
automatically network using HomePlug
AV via the electricity mains power
socket. You must use a compatible
HomePlug AV adapter or router
(connected to your Computer or
Storage device) to provide a HomePlug
connection to stream content. No
additional configuration is required.
Plug the supplied grey
straight LAN cable into
the LAN socket on the
DMA1100P and the other
end to the LAN/Ethernet
port on your router.
1. Using a HomePlug compatible
router or adapter
2. Using a router
directly connected
Plug the supplied red
crossover LAN cable to the
LAN socket on the
DMA1100P and the other
end to the LAN/ Ethernet
port on your computer or
laptop*.
3. Using a computer or
laptop directly for media
content
* It is not recommended for Apple products.
3
You will need to connect your computer (that has the digital media software installed) to
the DMA1100P via one of the methods listed above.
i