Page 8For technical questions, please call 1-800-444-3353.SKU 91764
Checking and Filling Hydraulic
Fluid
Lower the lift completely. Remove the 1.
Access Panel (36) and the Oil Plug
(P23) underneath.
The oil level should be even with the 2.
should be able to see the oil.
If the oil level is low, add SAE 3.
mixing different brands of oils. Do not
use any other uid or brake uid.
Bleeding
Note: If the Lift appears not to be
working properly, it may be
necessary to bleed trapped air
from its hydraulic system.
Check oil level. Replace plug.1.
Depress Release Foot Pedal (10).2.
Pump the Foot Pedal (11) several 3.
times.
Let up on Release Foot Pedal (10).4.
Pump Lift Pedal (11). If the 5.
motorcycle lift does not elevate
smoothly or Pedal (11) feels
“spongy”, repeat steps 2 - 5.
NOTE: Do not tamper with the check
valves. Any repairs should be
