A SERVICE OF

logo

13D-Link DCS-5020L User Manual
Section 2 - Installation
Zero Conguration will navigate to the mydlink Live View tab for your camera
where you will see a screen similar to the following.
If you wish to connect your camera to your router wirelessly, you can simply
disconnect the Ethernet cable and move the camera to its intended location.
Your router's wireless settings have been automatically transferred to the camera
and no further conguration is required.
Your camera is now set up. You can skip to “mydlink” on page 18 to learn
more about the mydlink features of this camera, or go to “Conguration” on
page 19 for advanced conguration.
Note: If the live image is blurry or out of focus, you can manually adjust the focus
by rotating the manual focus bezel surrounding the camera lens.