Specifications 89
Specification Value
Weight (maximum) 40.8 kg (110 lb)
Weight (when lightly loaded) 24.9 kg (55 lb)
Input requirements
Rated input voltage 100 VAC to 240 VAC *
Rated input frequency 47 Hz to 63 Hz
Rated input current 10 A (100 V) to 6.7 A (200 V)
Rated input power 1500 W
BTUs per hour 2730
Power supply output
Rated steady-state power 800 W (low line), 1000 W (high line)
Maximum peak power 1000 W (low line), 1200 W (high line)
* 100 to 127 VAC is required for 10 A; 200 to 240 VAC is required for 6.7 A.
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, refer to the HP Enterprise Configurator website (http://h30099.www3.hp.com/configurator/
).
FBDIMM specifications
CAUTION: Be sure to install FBDIMMs in the proper configuration. Refer to the Documentation CD.
Specification Value
Type FBDIMM, PC2-5300F, Fully-Buffered DIMMs
Size 512-MB, 1-GB, 2-GB, 4-GB, 8-GB
Width 72 bits
Upgrade requirement *
FBDIMMs must be installed in pairs within a bank. A bank
must be populated with two FBDIMMs with identical HP
part numbers.
*Use only Registered DDR2 FBDIMMs. Use HP FBDIMMs only.
1.44-MB diskette drive specifications
Specification Value
Dimensions
Height 12.7 mm (0.5 in)
Width 96 mm (3.8 in)
Depth 130 mm (5.1 in)
LEDs (front panel) Green = Active
Read/write capacity per
diskette
High density 1.44 MB
Low density 720 KB
