A SERVICE OF

logo

Removal and replacement procedures 64
Remove the system board from the tray:
1. Loosen the nine screws that secure the system board to the tray.
2. Slide the system board back, up and out of the tray. Remove the system board from the tray.
Figure 54 Removing the System Board from the Tray
To reinstall the system board:
1. Align the system board I/O connectors to their openings and slide the system board into place.
The nine screw holes on the tray should align with the system board.
2. Fasten the nine screws on the system board to secure the system board to the tray.
Figure 55 Reinstalling the System Board to the Tray