© Titan Tool Inc. All rights reserved. 19
Item
Part # Description Quantity
140 702-404 Outer Housing (excludes 141).........1
141 761-244 Screw...............................................1
142 702-084 Motor Field Assembly (110V units)
(excludes 143, 144).........................1
702-211 Motor Field Assembly (100V units)
702-137 Motor Field Assembly (230V units)
143 700-639 Screws.............................................4
144 702-056 Mounting Stud..................................2
Motor Housing Replacement
WARNING: Before proceeding, follow the Pressure
Relief Procedure outlined on page 5. Additionally, follow
all other warnings to reduce the risk of an injection
injury, injury from moving parts or electric shock.
Always unplug the sprayer before servicing!
1 Follow steps 1 through 6 in Armature Replacement.
2. Remove Pressure Control Board and screws, located on
Page 20.
3. Disconnect black wire from Post (#2) of Motor Starter
(#54).
4. Disconnect black wire from Motor to white wire from
Power Cord.
5. Remove outer Motor Housing (#140).
6. Loosen set screw (#141) and push Motor Field Assembly
(#142) out from the back of the outer Motor Housing
(#140).
7. Inspect Motor Field Assembly (#142). If damaged,
replace.
8. To install Motor Housing, reverse steps 1 through 6 here
and steps 1 through 7 of the Armature Replacement.
140
144
143
141
142
Figure 6
