24 © Titan Tool Inc. All rights reserved.
Bleed Valve Assembly (P/N 944-028)
Item Part # Description Quantity
1 944-020 Valve body................................................1
2 944-024 Knob assembly.........................................1
3 944-904 Valve seat.................................................1
4 945-003 Copper gasket..........................................1
5 761-715 Ball, T.C....................................................1
6 944-026 Valve stem stop........................................1
7 944-004 O-ring, 37)(............................................1
Service Instructions
This bleed valve has a tungsten carbide valve seat and should
not require frequent replacement. The tungsten carbide ball,
in normal service, will last a long time because it rotates and
wears evenly. If there is leakage, replace the ball.
Open the adjustment knob, to full counterclockwise
position before unthreading valve seat, from valve body.
If the valve stem is rotated inwardly with the ball removed,
the 37)( o-ring may require replacement. If there has
been leakage from the valve stem, the 37)( o-ring
should be replaced
All non-moving threads must be assembled with Speeflo
Loctite Sealant (P/N 426-051).
CAUTION
NOTE: The valve stem stop must be unthreaded from
the valve stem with a socket screwdriver, then
the valve stem can be threaded out of the
valve body.
CAUTION
1
2
3
4
5
6
7
Filter Assembly
Item Part # Description Quantity
1 920-917 Filter cap assembly ..................................1
2 920-103 Ball ...........................................................1
3 920-004 Filter element, 50 mesh............................1
4 920-006 Gasket, 37)( (thick) ...............................1
5 920-070 Gasket, 37)( (thin) .................................1
6 227-027 Pipe plug ..................................................1
7 930-920 Filter body.................................................1
8 227-033 Pipe plug ..................................................2
9 191-324 Hex nipple ................................................1
Filter Service Kit (P/N 920-050)
Item Part # Description Quantity
2 920-103 Ball ...........................................................1
4 920-006 Gasket, 37)( ..........................................1
5 920-070 Gasket, 37)( ..........................................1
Specifications
Maximum Working Pressure............5000 psi (345 bar)
Filter Area.........................................18 In2 (116 cm2)
Outlet Ports......................................(1) 1/4" NPT(F) for bleed
valve
(1) 3/8" NPT(F) with 1/4
NPS(M) hose connection
(1) 3/8" NPT(F) plugged
for additional gun hookup.
Wetted Parts ....................................Carbon steel with
electroless nickel and
cadmium plating, stainless
steel, tungsten carbide,
PTFE
1
2
3
4
5
6
9
7
8
8
