1
6
16
17
18
19
7
8
9
10
11
12
13
14
15
20
5
4
3
2
23
25
26
27
28
29
12
13
17
23
24
21
22
Second Gun Assembly Complete (P/N 759-055)
Item Part #
Description Quantity
1 756-029 Block clamp..........................................1
2 424-288 Cable guide...........................................1
3 756-124 Extension support bracket....................1
4 814-002 Hex nipple ............................................1
5 203-516 Whip hose assembly ............................1
6 862-436 Screw, hex head...................................1
7 862-002 Lock washer .........................................1
8 424-226 Cable mounting clamp..........................1
9 424-224 Support arm..........................................1
10 756-034 Knob .....................................................1
11 424-201 Gun holder............................................1
12 858-002 Lock washer .........................................2
13 858-636 Screw, hex head...................................2
14 756-035 Clamp ...................................................1
15 858-912 Screw, shoulder....................................1
16 424-229 Grease fitting........................................1
17 424-248 Flanged bearing ...................................2
18 858-637 Screw....................................................1
19 858-601 Nut........................................................1
20 940-553 Ball valve..............................................1
21 227-006 Hex nipple ............................................1
22 424-216 Gun control cable assembly.................1
23 858-603 Nut........................................................2
24 860-936 Screw, shoulder....................................1
25 424-202 Actuator lever .......................................1
26 424-249 Sleeve bearing .....................................1
27 858-653 Screw, socket head ..............................1
28 520-100 Airless gun, SGX..................................1
29 641-517 Reversible tip, .017” .............................1
645-1904 Reversible tip, .019...............................1
Second Gun Installation
Before installing the second gun, follow the “Pressure Relief
Procedure” in the Cleanup section of this manual. Once you
have completed this procedure, unplug the power supply
cord. Failure to reduce pressure can result in serious injury.
1. Engage the first gun’s trigger lock.
2. Remove the trigger cable from the block of the first gun.
NOTE: The gun or guns can be installed on either side
of the cart and can face either forward or
backward.
Trigger Cable
WARNING
NOTE: The gun support beam must be removed to
install the second gun and hose. The sprayer
must be shut down before installation.
26 © Titan Tool Inc. All rights reserved.
