A SERVICE OF

logo

Open as PDF
next previous
VX-177 OPERATING MANUAL22
9. If you need to modify the VFO-B (transmit) frequency (for Doppler Shift correction,
etc.), just press the
[
VFO
(
PRI
)]
key, then make the necessary change, then press
[
VFO
(
PRI
)]
key once more to restore VFO-A to the “receive VFO” position.
10. When you have finished with Split operation, re-enter the Set mode, and change Set
Mode Item 50: VFO.SPL to “VSP.OFF.”
A split frequency pair set up via the VFO Split feature cannot be stored directly into memory.
You can, however, store odd frequency pairs using a different (slightly simpler) procedure.
See page 29.
VFO SPLIT MODE
REPEATER OPERATION