VX-177 OPERATING MANUAL82
Set Mode Item 51
[
WID.NAR
]
Function: Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.
Available Values: WIDE/NARROW
Default: WIDE
Note: If “Narrow” is selected, the receiver audio level is increased slightly to compensate
for the reduced deviation. The receiver IF filter bandwidth is not changed via this setting.
Set Mode Item 52
[
EAI
]
Function: Enables/Disables the Emergency Automatic ID (EAI) Feature.
Available Values:
INT. 1M - INT.10M, INT.15M, INT.20M, INT.30M, INT.40M, INT. 50M,
CON. 1M - CON.10M, CON.15M, CON.20M, CON.30M, CON.40M, CON. 50M, and OFF
Default: OFF
The following Set Mode Items will appears when the optional FTD-7 DTMF Paging
Unit is installed.
Set Mode Item 53
[
ANI
]
Function: Enables/Disables the ANI function.
Available Values: ANI.OFF/ANI. ON
Default: ANI. OFF
Set Mode Item 54
[
ANI.WRT
]
Function: Program the ANI Identifier.
See page 59 for details.
Set Mode Item 55
[
PAGER
]
Function: Enables/Disables the ANI function.
Available Values: PAG.OFF/PAG. ON
Default: PAG. OFF
Set Mode Item 56
[
PAG.COD
]
Function: Setting the Pager Code for the DTMF Pager.
See page 55 for details.
Set Mode Item 57
[
PAG.ABK
]
Function: Enables/Disables the Answer Back function of the DTMF Pager.
Available Values: ABK.OFF/ABK. ON
Default: ABK. OFF
SET
(
MENU
)
M
ODE
