Appendix: Advanced Settings for H.264
58 ViewCast
Configuring Default Directory Setting
The Niagara 2120 stores AV files when you click the Save to File option in the encoder profile in the
Default AV folder. Refer to the Save to File option under the Flash Encoder Properties (Figure 46)
sections for information on setting an encoder profile to create an AV file.
NOTE: ViewCast strongly recommends you do not alter the default directory setting unless you
understand the risk of saving your files to a directory not located on the D: drive. If you save
your files to another drive on the Niagara 2120, the system could delete the files when you
use the Restore to Niagara 2120 Factory Defaults feature.
Only drive D on the Niagara 2120 has available storage to save your files. This drive has
approximately 105 Gigabytes of storage capacity.
Use drives C, E, and F strictly for the Niagara 2120 operational programs. Any modifications
to these drives can permanently damage your system and void your warranty.
Figure 46. Default AV Folder Field
Setting the High Temperature Alert
The Alert Configuration links to the Niagara 2120 Alerts window (Figure 47). Refer to pertinent
previous sections in this user guide for information on setting the Niagara 2120 Alerts.
Figure 47. High Temperature Alert
You can enable an alert if the Niagara 2120 reaches a predefined maximum temperature level. To
set the temperature level, click an option from the drop-down menu (Figure 48).
