Operating instructions
Continued
The automatic cycles
The automatic cycles allow you to select the
degree of dryness you prefer for the dothes
being dried.
The automatic DRY-MISER@ control is a
thermostat that senses the dryer air tempera-
ture. The dryer automatically shuts off when
the selected dryness is reached.
The Cycle Control Knob will not move until
the clothes load is almost dry, or the cool-
down portion of the cyde has been reached.
After the cool-down portion is complete, the
Cyde Control Knob automatically moves to an
OFF area and tumbling stops.
Use KNITS to dry knitted items and light-
weight delicate fabrics. The load tumbles
without heat during the last 5 minutes. This
helps make the load easier to handle.
For the first few loads, set the Cyde Control
Knob to point to the + in either automatic cycle.
When the dryer stops, feel the dried items.
l
If items are drier than you like, use a setting
to the right of the t the next time you dry a
similar load.
l
If items are not as dry as you like, use a
setting to the left of the * the next time you
dry a similar load.
NOTE: Overdrying can cause shrinkage, static
cling and damage to some fabrics.
6