Setting mode
The appliance is in setting mode when all
programme lights are off and End of pro-
gramme light flashes.
IMPORTANT!
Always remember that when performing opera-
tions such as:
• selecting a washing programme
• setting the water softener
• deactivation/activation of the audible signals
the appliance MUST be in setting mode.
If a programme light is illuminated and End of
programme light is illuminated with fixed light,
the last performed programme is still set.
In this case the programme has to be cancelled:
1.
Press and hold the Programme selection/
Cancel button until the light of the running
programme turns off and the End of pro-
gramme light is flashing.
2.
Release the Programme selection/Can-
cel button.
Delay start button
This option allows the start of the programme to be
delayed by 3 hours.
Once the washing programme has been set, press the
delay start button. The corresponding indicator light
illuminates.
The countdown of the delay start begins automatically.
Once the countdown has elapsed the washing pro-
gramme will start automatically. The delay start indi-
cator light turns off.
5
