Filter
Top Products
11
SYSTEM SETUP
Use care when adhering the handpiece holder to selected surface.
The double-sided adhesive fastens quickly and permanently.
USB Interface Connection - Connect the USB Type A connector side of the
USB Umbilical to any available USB 2.0 High Speed port on the user supplied
Computer System. Always make sure to
uussee tthhee ssaammee UUSSBB ppoorrtt
whenever recon-
nection of the USB cable is necessary.
UUSSBB IInntteerrffaaccee CCoonnnneeccttiioonn
USB Type A
Connector
Computer
USB Port
USB
Umbilical
Camera Handpiece Holder Installation - Using the supplied double-
sided adhesive fastener, the Camera Handpiece Holder, part number A5145,
can be fastened to any convenient location for safe storage of the USB Umbilical
or Camera Handpiece when not in use.
Install the Camera Handpiece Holder as follows:
1. Remove the protective film from the double-sided adhesive on the
Handpiece Holder
2. Attach the Camera Handpiece Holder to a flat, clean dry surface where
the Acclaim Camera Handpiece or USB Umbilical can be located for
convenient storage.