Filter
Top Products
58
Carmra/Printer Connection
Connecting with the the USB cable.
Plug USB cable into the port of your camera USB Series “A” plug connects to your
printer
1. Plug Series A of the USB cable into the marked socket on your printer.
Location of USB socket will vary from printer to printer.
2. Plug USB of the USB cable into the port on your camera.
PLEASE
CONNECT TO DEVICE
DEVICE
IS CONNECTED
PICTBRIDGE
PICTBRIDGE
THIS IMAGE
ALL IMAGES
ALL INDEX
NOTE:
• “ DEVICE IS CONNECTED” displays on the LCD screen, indicating a
proper connection to the printer.
• Do not connect the USB cable to the camera until PictBridge is enable and
when prompted by the “PLEASE CONNECT TO DEVICE” screen. Or if you
already have connected the cable to the camera, do not plug into printer
until prompt to do so. Not following this sequence will result in connection
failure.