14
Troubleshooting (continued)
The image is blurry.
• The subject may have moved while you were taking the picture. Hold
the camera steady and take the picture again.
• You may have moved the camera before it beeped, signaling that the
image was captured. Take the picture again and hold the camera
steady until you hear the beep.
• The subject may be out of the camera’s range. Keep a minimum dis-
tance of 2 feet (60 cm). The flash illuminates subjects up to a distance
of only about 10 feet (3 m).
The image is too dark.
• There may not be enough light. Set the flash to Automatic or Flash On.
• The subject may be too far away for the flash. The flash illuminates sub-
jects up to a distance of only about 10 feet (3 m).
• Use PhotoWise to adjust the brightness and contrast of your image (see
the .pdf file
PhotoWise Tips
for more information).
abc
TM
Agfa ePhoto307 User’s Guide