Filter
Top Products
23
Motion Detection
To enable Motion Detection:
1. In Movie/Picture Record Mode, press OK Button to switch to record menu screen.
2. Use Right/Left Buttons to select Movie Mode. Submenu of Movie Mode will pop out on the
screen.
3. Use Up/Down Buttons (Tele-Wide Buttons) (
) to select Motion Detect then press OK
Button to switch to Motion Detect submenu.
4. Use Up/Down Buttons to choose On or Off.
5. Press OK Button to validate the setting and exit.
6. Camera will start to record video once if there is a movement for 3 consecutive seconds.
Stop recording if there is no movement for 3 seconds.
Motion Detect Motion Detect Option
Night Mode
With the camera set to Night Mode, you can take images in a low-light environment.
To enable the Night Mode:
1. In Movie/Picture Record Mode, press Enter Button to switch to record menu screen.
2. Use Right/Left Buttons to select Movie Mode. Submenu of Movie Mode will pop out on the
screen.
3. Use Up/Down Buttons to select Night Mode, then press Enter Buttons to switch to Night
Mode submenu.
4. Use Up/Down Buttons to choose ON or OFF.
5. Press Enter Button to validate the setting and exit.
OK Button