Filter
Top Products
27
Trigger
The Trigger window contains the control settings for external device through the I/O port, and
the settings required for e-mail.
Enable Trigger Email
- SMTP Server Address: To use the e-mail alert function, you must enter the mail server
address in the field.
- Sender e-mail Address: Enter the e-mail Address of sender.
- Receiver e-mail Address 1/2: Enter the e-mail Address of receiver(s).
- User Name: Enter the user name in this field to login sender’s mail server.
- Password: Enter the user password in this field.
- Sending Interval: Enter the time interval to send next e-mail; the unit is by second.
- Sending Times: Enter the sending times for every e-mail alert.
- Send a test e-mail: When completed, you can do a test to confirm the related settings by
checking this option.
Trigger Output
Check the item to enable the camera to receive the signal from specified detection area, and
then enter the proper settings in the Time Interval field.