Filter
Top Products
-
3
-
Rear View
* The camera’s Ethernet port supports IEEE 802.3af Power-over-Ethernet (PoE) standard that enables DC power to be supplied to
the camera using wires in the connecting twisted-pair cable. Any 802.3af compliant device attached to the port can directly supply
power to the camera over the twisted-pair cable without requiring its own separate power source. This capability gives the network
administrator centralized power control, which translates into greater network availability.
GPIO and RS485
is used to connect the
external devices.
Reset Button
will restart the
camera when it is pressed quickly;
when it is pressed and held for five
seconds, the camera will restore
the factory default settings.
DC Power Connector
connects the AC power
adapter, in order to supply
power to the camera.
Ethernet Cable Connector
*
connects the network cable,
which supports the NWay
protocol so that the camera
can detect the network speed
automatically.
Audio I/O Connector
s
:
Audio Out connects an
external active speaker.
Mic In
connects an external
microphone.